Types of Pliers

Checkout the Different Types of Pliers & Their Applications:

Pliers are hand tools used for many tasks around the house and garage, including fixing a bicycle, making a craft, repairing a kitchen stool, and doing some wiring. They can be used to grip, position, tighten, loosen, and cut objects.

#1 Hose Clamp Plier:

A Hose clamp plier is manufactured to compress the hose and spring clamp, tightening the joint. They come in a wide range of forms.

#2 Crimping Plier:

A crimping plier consists of a fulcrum at the end and is used as a nutcracker. The wires are fed first into the jaw jack, and then to the connector.

#3 Long Nose Plier:

The Jaws of this type of pliers are tapered in length and are conical. These pliers do not have a cutting edge. These are used where there is no adequate space for a combination of the pliers.

#4 Diagonal Plier:

The jaws of diagonal pliers have an angled edge that is made to cut through the thick wire. They are very strong and can also be used to cut nails.

#5 Slip Joint Pliers:

As per their name, these are pilers that permit adjustment to a greater range of openings by slipping motion of the two halves about the pin or rivet that connects them.

#6 Snap Ring Plier:

The Snap ring pliers have small or round jaws to help close snap plates. Rings are open-ended ends that fit into the grooves of a dowel or other round object.

#7 Tongue and Groove Pliers:

The Tongue and groove pliers are adjustable types of pliers with a jagged groove with an upper handle, allowing the lower jaw to be closed in multiple positions.

#8 Bent Nose Pliers:

This variation of needle nose pliers consists of a set of jaws that tilt at an angle at the midpoint (45 or 90 meters at most). This allows them to fasten surfaces when multiple pliers are needed.

#9 Bail-Making Pliers:

The jaws of this plier consist of two dowels, one larger than the other. It is primarily used in jewelry making.

#10 Brake Spring Pliers:

A Brake spring plier is a multi-device specifically designed to deal with the springs found in drum brakes.

#11 Battery Pliers:

They are designed to be used mainly in the automotive industry to maintain bolts on car batteries and jumper cables.

#12 Canvas Pliers:

The canvas plier is made of a wide jaw, which allows a person to do what usually takes two.

#13 Chain Nose Pliers:

These chain nose pliers are tools used in wire shaping and jewelry making. The jaw form allows bending, crimping, and wire shaping.

#14 Combination Pliers:

This piler has flat jaws. One side of the jaw is sharp for cutting purposes. These pliers are useful in a large number of jobs like cutting wires, turning nails, and each small jobs.

#15 Eyelet Pliers:

The eyelets plier allows the addition of laces and drawstrings to the fabric. These holes consist of a ring and a long hub, which should be dislodged.

#16 Fencing Pliers:

This curious-looking multi-tool resembles a hammer with two handles. The positions in the fulcrum provide to cut the wires of various gauges, while the staples in the left jawbone have a hammer surface for driving.

#17 Grommet Pliers:

They are like eyeglass pliers at work. Grommet pliers are used to make holes in tarps and other materials, as well as by gluing the grommets.

#18 Linesman Pliers:

Although the name may not sound familiar, you have likely seen or used it at some time. They consist of a small gripping surface towards the tip and a cutting surface in the middle.

#19 Locking Pliers:

These pliers lock the jaws in place, making them engaging for snatching screws and bolts. There are a variety of jaw sizes available for this tool, which enables you to choose a design that best suits your needs.

#20 Piston Ring Pliers:

There are two forms o f piston ring pliers. Both are used in engines to remove and replace piston rings.